The JBA ROK9 mounting bracket enables a no-drill, sleek fitment to the Rhino V5 platform.
 
This bracket conting system in 3 offset options and will depend on the Rhino mounting system used. Primarily, the offset selection is critical when mounting with a Backbone system and the particular vehicle being fitted as the distance to the edge of the rack to the Backbone varies from vehicle to vehicle and from front to rear of the vehicle.
 
The 3 options available are 
JBA-LB103 Inset Bracket
JBA-LB104 Offset Bracket
JBA-LB105 Extreme Offset Bracket
 
The JBA-LB103 Inset Bracket sits flush with the inside edge of the Rhino platfrom at the top of the bracket and angles back in towards the Backbone at 30 degrees. This bracket is used when there is over 35mm of room bewteen the inside edge of the Rhino Platform and the backbone or where standard Rhino Legs are used instead of a BackBone. 
 
The JBA-LB104 Offset Bracket sits flush with the outside edge of the Rhino platfrom at the top of the bracket and angles back in towards the Backbone at 30 degrees. This bracket is used when there is under 35mm of room bewteen the inside edge of the Rhino Platform and the backbone and is generally towards the front of the vehicle as the Backbone tapers in.  
 
The JBA-LB105 Extreme Offset Bracket sits 10mm past the outside edge of the Rhino platfrom at the top of the bracket and angles back in towards the Backbone at 20 degrees. This bracket is specifically used for the 70 series Landcruiser. 
 
Refer to the Fitment Chart for currently confirmed vehicle fitment locations. 
 
JBA also offer a rear fitment option for the Rhino Rack to pick up on the rear slot if required. 
 
Key Features
Includes Stainless Steel fasteners
Made from 2mm powdercoated aluminium
Designed to work perfectly with the JBA Dual Amber/White ROK9 LED
 
Fitment Notes
No drilling required to Rhino Platform 
Pre-drilled holes allow for fitment most standard ROK9 Lights (TJM, Lightforce and Stedi)